92   Artículos

« Anterior     Página: 1 de 5     Siguiente »

 
en línea
Lutz Auersch    
The mitigation of train-induced ground vibrations by track solutions is investigated by calculations and measurements. The calculation by a wavenumber domain method includes the correct vehicle?track interaction and the correct track?soil interaction. So... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Lei Mei, Wenhui Yan, Junwei Zhou and Weichao Shi    
Recent studies indicate that bow foil biomimetic systems can significantly improve ship propulsion in waves. In this paper, the DTMB 5415 ship model is taken as the object and a semi-active elastic flapping foil is proposed to install at its bow underwat... ver más
Revista: Journal of Marine Science and Engineering    Formato: Electrónico

 
en línea
Peifang Hu, Yong Liu, Jingfeng Wang, Wanqian Wang and Guangdong Pan    
A novel CFS composite wall filled with cement-based lightweight polymer material (CFS-CLPM composite wall) has been proposed and proven to have excellent architectural and mechanical performance. To promote its application in prefabricated concrete (PC) ... ver más
Revista: Buildings    Formato: Electrónico

 
en línea
Wen-Long Lin, Zhen Wang, Fei Liu and Jiang-Tao Yi    
Subjected to pre-load, spudcan foundations, widely utilized to support offshore jack-up rigs, may penetrate in a few diameters into soft clays before mobilizing sufficient resistance from soil. While its stress?strain behavior is known to be affected by ... ver más
Revista: Journal of Marine Science and Engineering    Formato: Electrónico

 
en línea
Philipp Beckerle, Florian Stuhlenmiller and Stephan Rinderknecht    
-
Revista: Actuators    Formato: Electrónico

 
en línea
E. I. Danilenko     Pág. 65 - 77
Revista: Nauka ta Progres Transportu    Formato: Electrónico

 
en línea
M. P. Nastechik,I. O. Bondarenko,R. V. Marcul     Pág. 146 - 156
Revista: Nauka ta Progres Transportu    Formato: Electrónico

 
en línea
Ruchi Shah, Marina W. Samuel and Jongsang Son    
The aim of this review was to provide an overview of the recent findings on the acute and chronic effects of static stretching on joint behaviors and neuromuscular responses and to discuss the overall effects of acute and chronic static stretching on sel... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Claudio Amadio, Luca Bomben and Salvatore Noè    
In this work, a general method for the design of concentric braced steel frames (CBF) with active tension diagonal bracings, applicable to single- and multi-storey structures, is presented. The method is based on the use of an elastic modal analysis with... ver más
Revista: Buildings    Formato: Electrónico

 
en línea
Anna Szymczak-Graczyk    
This article presents the effect of taking into account the subgrade coefficient on static work of a pontoon with an internal partition, made in one stage and treated computationally as a monolithic closed rectangular tank. An exemplary pontoon is a sing... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Giacomo Rismondo, Marta Cianferra and Vincenzo Armenio    
The present paper contains the results of the numerical analysis of the interaction between a Newtonian incompressible turbulent flow and a linear elastic slender body, together with the influence of the fluid?structure interaction (FSI) on the noise gen... ver más
Revista: Journal of Marine Science and Engineering    Formato: Electrónico

 
en línea
Guangbin Yu, Hancheng Mao, Lidong Jiang, Wei Liu and Tupolev Valerii    
Understanding the contact mechanics of rough tooth surfaces is critical in order to understand phenomena such as tooth surface flash temperature, tooth surface wear, and gear vibration. In this paper, the contact behavior between the meshing tooth surfac... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Wenbin Zhang, Yan Feng, Xiangqiang Zeng, Ming Xu, Liang Gong and Lijun Rui    
A new type of assembled integral multi-ribbed composite floor system with novel wet joint and steel sleeve connections, which exhibits satisfactory strength and stiffness, was proposed in the previous study. To further study the flexural performances of ... ver más
Revista: Buildings    Formato: Electrónico

 
en línea
Pyounghwa Kim, Whi Seok Han, Jeong Hun Kim, Jeonghwa Lee, Young Jong Kang and Seungjun Kim    
High-voltage transmission towers consist of structures that are designed to avoid the risk of electric shock and prevent the risk of collapse. Hence, for efficiency, they are generally designed as high-rise towers. The main tower posts are the primary st... ver más
Revista: Buildings    Formato: Electrónico

 
en línea
Tingting Xie, Wenjuan Ren, Yifang Chen, Jiajia Sheng and Linbing Wang    
Incorporating fibers into asphalt mixtures as additives and stabilizers can significantly enhance the performance of asphalt pavements. This study aimed to analyze the impact of using basalt and bamboo fibers as modifiers on the properties of asphalt mas... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Xiaojun Zhu, Longji Dang, Shuting Liang, Ming Zhang, Jian Yang and Xin Dai    
To investigate the hysteretic behavior of an X-shaped metal damper (XMD) with an oblique angle, cyclic loading tests were carried out on nine specimens, including two XMDs without buckling-restrained devices, four XMDs with stiffening ribs, and three XMD... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Changbao Yang, Zhisheng Wang, Yuanwei Lyu, Jingyang Zhang and Ben Xu    
With increasing demand for load capacity and dynamic responses, the new generation of Gas Dynamic Foil Bearings (GDFB), assembled from preloaded elastic multi-leaf foils, has been put forward. It exhibits steady and dynamic characteristics that are more ... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
O. S. Raspopov     Pág. 112 - 117
The topological models for longitudinal and torsional oscillations of rod structures with various concentrated inclusions in distributed mass, stiffness of elastic medium and rod stiffness are done. The high efficiency of application of theory of graphs ... ver más
Revista: Nauka ta Progres Transportu    Formato: Electrónico

 
en línea
A. M. Orlova     Pág. 157 - 161
The paper proposes a general approach to the choice of in-plane stiffness of three-piece bogie including the expressions of shear and bending stiffness and the dependencies of a critical speed on tangent track and in curves, wear factor and lateral accel... ver más
Revista: Nauka ta Progres Transportu    Formato: Electrónico

 
en línea
Hasan Santoso     Pág. pp. 37 - 42
Buckling of a through girder generally is predicted by the so called U-frame approach which treats the compressed top flanges as compression members restrained elastically by the web stiffness. This study used a line-type finite element analysis to exami... ver más
Revista: Civil Engineering Dimension    Formato: Electrónico

« Anterior     Página: 1 de 5     Siguiente »