|
|
|
Riccardo Vettraino, Valeria Valentini, Paola Pogliani, Marco Ricci, Stefano Laureti, Serena Calvelli, Rocco Zito, Luca Lanteri and Claudia Pelosi
This paper summarizes the main results of the study, diagnostics, and restorations conducted and applied to a 16th century wall painting (a portion of the frieze and the Riario coat of arm) in Palazzo Gallo (Bagnaia, Viterbo district?central Italy) recen...
ver más
|
|
|
|
|
|
|
Yoonjae Chung, Seungju Lee and Wontae Kim
Non-destructive testing (NDT) is a broad group of testing and analysis techniques used in science and industry to evaluate the properties of a material, structure, or system for characteristic defects and discontinuities without causing damage. Recently,...
ver más
|
|
|
|
|
|
|
Seunguk Na and Inkwan Paik
Rebar corrosion monitoring techniques have been used in studies involving embedded sensors that can detect changes in the corrosion currents and the polarization resistance of rebars in large structures. Defect detection methods that employ infrared came...
ver más
|
|
|
|
|
|
|
The structure of Tvrda and its buildings date back to the Middle Ages. Tvrda represents the Old Town of the city of Osijek and the best-preserved and largest ensemble of Baroque buildings in Croatia. After the withdrawal of the Ottomans in 1687, during t...
ver más
|
|
|
|
|
|
|
Hadi Sanati, David Wood and Qiao Sun
The failure of wind turbine blades is a major concern in the wind power industry due to the resulting high cost. It is, therefore, crucial to develop methods to monitor the integrity of wind turbine blades. Different methods are available to detect subsu...
ver más
|
|
|
|
|
|
|
N. Aidossov, Vasilios Zarikas, Aigerim Mashekova, Yong Zhao, Eddie Yin Kwee Ng, Anna Midlenko and Olzhas Mukhmetov
Breast cancer comprises a serious public health concern. The three primary techniques for detecting breast cancer are ultrasound, mammography, and magnetic resonance imaging (MRI). However, the existing methods of diagnosis are not practical for regular ...
ver más
|
|
|
|
|
|
|
Nevena ?ivanovic, Marina A?krabic, Aleksandar Savic, Mi?a Stevic and Zoran Stevic
Infrared thermography is an advanced technique usually applied for the assessment of thermal losses through different elements of the building envelope, or as a method for detection of damage (cracks) in reinforced concrete elements, such as bridges. Use...
ver más
|
|
|
|
|
|
|
Kaixuan Zhao, Yijie Duan, Junliang Chen, Qianwen Li, Xing Hong, Ruihong Zhang and Meijia Wang
The respiratory status of dairy cows can reflect their heat stress and health conditions. It is widely used in the precision farming of dairy cows. To realize intelligent monitoring of cow respiratory status, a system based on infrared thermography was c...
ver más
|
|
|
|
|
|
|
Simon Verspeek, Ivan De Boi, Xavier Maldague, Rudi Penne and Gunther Steenackers
We address the challenge of determining a valid set of parameters for a dynamic line scan thermography setup. Traditionally, this optimization process is labor- and time-intensive work, even for an expert skilled in the art. Nowadays, simulations in soft...
ver más
|
|
|
|
|
|
|
Tianjie Zhang, Md Asif Rahman, Alex Peterson and Yang Lu
The qualitative measurement is a common practice in infrastructure condition inspection when using Infrared Thermography (IRT), as it can effectively locate the defected area non-destructively and non-contact. However, a quantitative evaluation becomes m...
ver más
|
|
|
|
|
|
|
Hamed Basir, Shahab Alaviyoun and Marc A. Rosen
An experimental thermal survey of a turbocharger was performed in an engine test cell using IR thermography. The emissivity coefficients of housings were specified using a furnace and camera. It was shown that the emissivity of the turbine, compressor, a...
ver más
|
|
|
|
|
|
|
Julia Schweikert and Bernhard Weigand
A central task in aviation technology is the development of efficient cooling techniques for thermal highly loaded engine components. For an optimal design of the cooling mechanisms, the heat transfer characteristics have to be known and need to be descr...
ver más
|
|
|
|
|
|
|
Simon Verspeek, Bart Ribbens, Xavier Maldague and Gunther Steenackers
Spot welds have a significant part in the creation of automotive vehicles. Since the integrity of, for example, a car, is dependent on the performance of multiple welds, it is important to ensure the quality of each spot weld. Several attempts have been ...
ver más
|
|
|
|
|
|
|
Chuanqing Geng, Wenxiong Shi, Zhanwei Liu, Huimin Xie and Wei He
As a revolutionary new technique, laser-engineered net shaping (LENS) is a layer additive manufacturing process that enables accurate, rapid and automatic repair of industrial component damage. In the laser repair (LR) process or in service, surface crac...
ver más
|
|
|
|
|
|
|
Alia Alshehri and Duaa AlSaeed
Medical diagnosis and computer-aided diagnosis systems.
|
|
|
|
|
|
|
Marta De Giorgi, Riccardo Nobile and Fania Palano
Since the presence of a notch in a mechanical component causes a reduction in the fatigue strength, it is important to know the kf value for a given notch geometry and material. This parameter is fundamental in the fatigue design of aeronautical componen...
ver más
|
|
|
|
|
|
|
Mario Ortega, Eugenio Ivorra, Alejandro Juan, Pablo Venegas, Jorge Martínez and Mariano Alcañiz
MANTRA system has been validated in laboratory condition with an electronic board maintenance task, but it has been developed to work for almost any industrial maintenance task of electromechanical devices such as electric motors, power control panels or...
ver más
|
|
|
|
|
|
|
Qiang Fang, Clemente Ibarra-Castanedo and Xavier Maldague
In quality evaluation (QE) of the industrial production field, infrared thermography (IRT) is one of the most crucial techniques used for evaluating composite materials due to the properties of low cost, fast inspection of large surfaces, and safety. The...
ver más
|
|
|
|
|
|
|
Isak Jonsson, Valery Chernoray and Radheesh Dhanasegaran
Aerothermal heat transfer measurements in fluid dynamics have a relatively high acceptance of uncertainty due to the intricate nature of the experiments. The large velocity and pressure gradients present in turbomachinery application add further complexi...
ver más
|
|
|
|
|
|
|
Jaroslaw Szrek, Jacek Wodecki, Ryszard Blazej and Radoslaw Zimroz
It is well known that mechanical systems require supervision and maintenance procedures. There are a lot of condition monitoring techniques that are commonly used, and in the era of IoT and predictive maintenance one may find plenty of solutions for vari...
ver más
|
|
|
|