|
|
|
Junjie Cai, Shengpeng Hu, Hongbing Liu, Danyang Lin, Wei Fu and Xiaoguo Song
Dissimilar materials brazing of Ti2AlNb alloy to GH99 superalloy is of great pragmatic importance in the aerospace field, especially the lightweight space aircraft components manufacturing. In this work, TiZrCuNi amorphous filler alloy was used as brazin...
ver más
|
|
|
|
|
|
|
Linning Wang, Yuan Liu and Jingjing Liang
Interrupted creep tests were performed on a polycrystalline Ni-base superalloy, and rejuvenation heat treatment (RHT) was carried out to restore the creep resistance. During creep deformation, the microstructural evolution can be characterized as coarsen...
ver más
|
|
|
|
|
|
|
Mengxiong Zhao, Tieying Wu, Zhenhua Zhao, Lulu Liu, Gang Luo and Wei Chen
Ultrasonic resonance fatigue test method at 20 kHz related to the very high cycle fatigue (VHCF) aims to accelerate a time-consuming experiment. In this paper, an ultrasonic fatigue device with a data acquisition system was improved for monitoring and re...
ver más
|
|
|
|
|
|
|
Qixiang Fan, Haojun Yu, Tiegang Wang and Yanmei Liu
A Si doped Pt modified aluminide coating was prepared by electroplating and the chemical vapour deposition method. The microstructure and oxidation resistance of the coating were studied, with a single Pt modified aluminide coating as a reference. The re...
ver más
|
|
|
|
|
|
|
|
Wojciech J. Nowak
In the present work the effect of surface roughness on oxidation behavior during the early stages of high temperature exposure of Ni-base superalloy IN 625 is described. The surface roughness was described using standard contact profilometer as well as n...
ver más
|
|
|
|
|
|
|
Chunlian Hu and Shanglin Hou
NiCrMoY alloy powders were prepared using inert gas atomization by incorporation of rare earth elements, such as Mo, Nb, and Y into Ni60A powders, the coatings were sprayed by oxy-acetylene flame spray and then remelted with high-frequency induction. The...
ver más
|
|
|
|
|
|
|
Alessio Fossati, Martina Di Ferdinando, Alessandro Lavacchi, Andrea Scrivani, Carlo Giolli and Ugo Bardi
CoNiCrAlY powders with similar granulometry and chemical composition, but different starting reactivity toward oxygen, were sprayed onto superalloy substrates by High Velocity Oxygen-Fuel producing coatings of similar thicknesses. After spraying, samples...
ver más
|
|
|
|
|
|
|
S. Ponseenivasan, Anish Kumar and K. V. Rajkumar
For the narrow gap dissimilar weld between a ferritic steel and a nickel base superalloy, a nickel base alloy buttering layer is deposited on the ferritic steel side as an intermediate layer. The bonding between the buttering layer and the ferritic steel...
ver más
|
|
|
|
|
|
|
Ivan Bunaziv, Vigdis Olden and Odd M. Akselsen
In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) the clad being stainless steel or a nickel-based superalloy, (ii) the pipe being API X60 or X65 h...
ver más
|
|
|
|
|
|
|
Gonghou Yao, Zhanqiang Liu and Haifeng Ma
The presence of residual stress seriously affects the mechanical performance and reliability of engineering components. Here, the authors propose a novel method to determine corresponding residual stress through micro-hardness measurements of machined su...
ver más
|
|
|
|
|
|
|
Xiaopeng Hu, Guolin Liu, Qing Liu, Wang Zhu, Sai Liu and Zengsheng Ma
Thermal barrier coatings (TBCs) suffer from the thermo-chemo-mechanical coupling action of thermal shock and calcium?magnesium?alumina?silicate (CMAS) corrosion. However, the failure mechanism of TBCs under the synergistic effect of thermal shock and CMA...
ver más
|
|
|
|
|
|
|
Nicholas Curry, Kent VanEvery, Todd Snyder, Johann Susnjar and Stefan Bjorklund
Suspension plasma spraying has become an emerging technology for the production of thermal barrier coatings for the gas turbine industry. Presently, though commercial systems for coating production are available, coatings remain in the development stage....
ver más
|
|
|
|
|
|
|
Xinmin Feng, Xiwen Fan, Jingshu Hu and Jiaxuan Wei
The GH4169 superalloy has the characteristics of high strength, strong thermal stability, large specific heat capacity, small thermal conductivity, etc., but it is also a typical hard-to-cut material. When cutting this material with ordinary cutting tool...
ver más
|
|
|
|
|
|
|
Rishikesh Karthikeyan, Satyanaryanan Seshadri, V Subramanya Sarma and M Kamaraj
India?s growing power demands and emission norms require more efficient coal-based power plants. The shifting of power plants from subcritical to ultra-supercritical (USC) steam conditions could improve efficiency by 12% and reduce CO2" role="presentatio...
ver más
|
|
|
|
|
|
|
Md Ehsan Asgar, Ajay Kumar Singh Singholi
Pág. 294 - 312
In today?s competitive modern manufacturing sectors, there is a vital need of utter precision and rigorous processing using various manufacturing approaches that directly influences the cost and processing duration of mechanized materials in addition to ...
ver más
|
|
|
|
|
|
|
Md Ehsan Asgar, Ajay Kumar Singh Singholi
Pág. 294 - 312
In today?s competitive modern manufacturing sectors, there is a vital need of utter precision and rigorous processing using various manufacturing approaches that directly influences the cost and processing duration of mechanized materials in addition to ...
ver más
|
|
|
|