|
|
|
|
|
Chi Zhang, Yaguo Lyu, Le Jiang and Zhenxia Liu
The numerical simulation method was used to investigate the deflection and deformation process of a circular lubricating oil jet in transverse shear airflow. The numerical model was compared and validated against the experimental data. The physical param...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yulong Chen, Qingxiang Meng and Jianwei Zhang
This study focused on the effects of the notch angle, notch length, and injection rate on hydraulic fracturing. True triaxial hydraulic fracturing experiments were conducted with 300 × 300 × 300 mm cement mortar blocks. The test results showed that the f...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yulong Chen, Qingxiang Meng and Jianwei Zhang
|
|
|
|
|
|
|
|
|
|
|
Dongfeng Yan, Zehang Zhao, Anchen Song, Fengming Li, Lu Ye, Ganchao Zhao and Shan Ma
The fluidic pintle nozzle, a new method to control the thrust of a solid rocket motor, has been proposed in recent years by combining the pintle with the aerodynamic throat (fluidic throat). The study of static characteristics has proved that it has a re...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jian Liu, Mengyao Xu and Wenxiong Xi
To protect turbine endwall from heat damage of hot exhaust gas, film cooling is the most significant method. The complex vortex structures on the endwall, such as the development of horseshoe vortices and transverse flow, affects cooling coverage on the ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hochang Jang and Jeonghwan Lee
This study analyzes the impact of injection condition design factors of (3-glycidoxypropyl)trimethoxysilane (GPTMS)?SiO2 nanofluid on improving wettability and oil recovery through flotation and core flooding tests, respectively. Flotation tests were con...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ruochen Wang, Guoxin Zhang, Pei Ying and Xiaoping Ma
The Co-Flow Jet (CFJ) technique is an effective way to enhance the aerodynamics of airfoils. The present study is to comprehensively investigate the effects of CFJ key parameters, viz., the jet momentum coefficient, the injection slot location, the injec...
ver más
|
|
|
|
|
|
|
|
|
|
|
Lucky Pradigta Setiya Raharja, Ony Asrarul Q., Zainal Arief, Novie Ayub Windarko
Pág. 91 - 118
In this research, modified PWM has been applied to the multilevel inverter (MLI) single-phase three-level diode clamp full bridge. Modified PWM is performed to produce minimum Total Harmonic Distortion (THD) the voltage because the quality of the good vo...
ver más
|
|
|
|
|
|
|
|
|
|
|
Hamed Abdeh, Giovanna Barigozzi and Nicoletta Franchina
Off-design condition of a rotor blade cascade with and without platform cooling was experimentally investigated. The ability of the gas turbine to operate down to 50% to 20% of its nominal intake air flow rate has an important consequence in the change i...
ver más
|
|
|
|
|
|
|
|
|
|
|
Bu-Geun Paik, So-Won Jeong, Young-Ha Park, Jong-Woo Ahn, Ilryong Park and Jein Kim
One of the important things in a ship?s rudder design is the incidence angle of the rudder inflow to improve rudder cavitation performance. In the present study, the rudder inflow is measured by a 3-D LDV (laser Doppler velocimetry) system in a large cav...
ver más
|
|
|
|
|
|
|
|
|
|
|
Lianjun Chen, Yang Zhang, Pengcheng Li and Gang Pan
This paper aims to reveal the motion law and collision behaviors of shotcrete particle flow jets. A physical model of the jet flow field composed of a nozzle structure and jet area was constructed and meshes with various sizes were used to mesh the nozzl...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yehuan Wang, Yong Wang, Yanli Wang, Cheng Chen, Lingwei Kong and Mengbing Xu
Marine sediment is an important channel for methane leakage from the earth interior to the atmosphere. The investigation of gas invasion in fine-grained marine sediments is of great theoretical and practical significance in marine science and engineering...
ver más
|
|
|
|
|
|
|
|
|
|
|
Motoki Ishikawa, Kakuta Ishida, Reika Kanya and Kaoru Yamanouchi
We developed an apparatus for measuring kinetic energy and two-dimensional angular distributions of femtosecond laser-assisted electron scattering (LAES) signals with a high detection efficiency, consisting of a photocathode-type ultrashort pulsed electr...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yong-Sin Syu and Yung-Chun Lee
This paper proposes a lens design method for effectively collimating the light emitting from a light-emitting diode (LED). This collimating lens contains two aspherical lens surfaces which can be mathematically characterized using a few designing paramet...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jun-Soo Kim, Won-Ju Lee, Van Chien Pham and Jae-Hyuk Choi
A numerical study was carried out to investigate the effects of injector spray angle (SA) and injection position (IP) on the combustion and emission characteristics of a two-stroke ME-GI marine engine at full load. Three-dimensional (3D) simulations of t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Jan Martin, Wolfgang Armbruster, Dmitry Suslov, Robert Stützer, Justin S. Hardi and Michael Oschwald
Hot-fire tests were performed with a single-injector research combustor featuring a large optical access (255 × 38 mm) for flame imaging. These tests were conducted with the propellant combination of liquid oxygen and compressed natural gas (LOX/CNG) at ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yi Han, Chibing Shen, Zhaobo Du and Haoran Tang
In the scramjet engine, the injection and mixing of fuel are the basis for organizing efficient combustion. The shock wave/jet shear layer interaction is one of the methods used to enhance fuel mixing in supersonic flow. In this research, the effect of t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xuan Jin, Yang Yang, Xiaomei Cao and Jinshui Wu
The variable-area pintle injector has unique geometry and spray characteristics compared to traditional coaxial injectors, and is advantageous for weight lightening and deep throttling of liquid rocket engines. To obtain an accurate prediction of the spr...
ver más
|
|
|
|
|
|
|
|
|
|
|
Pragya Berwal and Shelly Biswas
Injection pattern of the oxidizer injected into the combustion chamber is a significant factor in evaluating the performance of a hybrid rocket. In the hybrid rocket combustion process, oxidizer flows over the solid fuel grain surface, leading to a turbu...
ver más
|
|
|
|
|
|
|
|
|
|
|
Mina Tadros, Manuel Ventura and C. Guedes Soares
An engine optimization model is developed to fit the calculated in-cylinder pressure diagram to the experimental data by finding the optimal values of the start angle of injection and the amount of injected fuel for different engine loads. Firstly, the e...
ver más
|
|
|
|
|
|