29   Artículos

« Anterior     Página: 1 de 2     Siguiente »

 
en línea
Tao Zhang, Xinyu Song, Xingping Kai, Yeguang He and Rundong Li    
In order to understand the breakup characteristics of a transverse liquid jet flow in an actual combustion chamber, a numerical study was conducted using the Volume of Fluid (VOF) method combined with grid adaptation technology. The study focused on the ... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Chuanxin Bai, Kai Liu, Tong Zhao and Jinjin Liu    
Selective catalytic reduction (SCR) is currently one of the most efficient denitration technologies to reduce nitrogen oxide (NOx) emissions of diesel engines. AdBlue (urea water solution, UWS) is the carrier of the reducing agent of SCR, and the spray p... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Xing Yang, Hang Wu and Zhenping Feng    
In this paper, detailed flow patterns and heat transfer characteristics of a jet impingement system with extended jet holes are experimentally and numerically studied. The jet holes in the jet plate present an inline array of 16 × 5 rows in the streamwis... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Xiao Cui and Boqi Jia    
The linear instability of an annular liquid jet with a radial temperature gradient in an inviscid gas steam is investigated theoretically. A physical model of an annular liquid jet with a radial temperature gradient is established, dimensionless governin... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Ali Bahadar    
Among various mechanisms for enhancing the interfacial area between gases and liquids, a vertical liquid jet striking a still liquid is considered an effective method. This method has vast industrial and environmental applications, where a significant ap... ver más
Revista: ChemEngineering    Formato: Electrónico

 
en línea
Rocco Portaro, Jad Sadek, Han Xu and Hoi Dick Ng    
The advent of new drug therapies has resulted in a need for drug delivery that can deal with increased drug concentration and viscosities. Needle-free liquid jet injection has shown great potential as a platform for administering some of these revolution... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Chi Zhang, Yaguo Lyu, Le Jiang and Zhenxia Liu    
The numerical simulation method was used to investigate the deflection and deformation process of a circular lubricating oil jet in transverse shear airflow. The numerical model was compared and validated against the experimental data. The physical param... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Chenglin Zhou, Jianfeng Zou and Yang Zhang    
In order to study the influence of streamwise forcing on the formation mechanism of liquid ligaments and droplets in the primary breakup process of liquid circular jet, the VOF interface capturing method-based direct numerical simulation was adopted, and... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Jiyang Qi, Jie Yin, Fei Yan, Ping Liu, Tieli Wang and Chen Chen    
In order to improve the efficiency and safety of vertical hydraulic transport systems for non-spherical particles, a new pipeline transport system with a tangential jet inlet is adopted in this study, and a modified non-spherical drag coefficient model i... ver más
Revista: Journal of Marine Science and Engineering    Formato: Electrónico

 
en línea
Cary Smith, Mark Gragston, Yue Wu and Zhili Zhang    
This work provides an analysis of an air-assisted atomizing nebulizer?s spray characteristics and combustion behaviors via application of various diagnostics. Two-phase far-field flows and flames of liquid ethanol and practical aviation fuel Jet A were c... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Alon Davidy    
-
Revista: ChemEngineering    Formato: Electrónico

 
en línea
Donglong Zhou, Jianlong Chang and Huawei Shan    
In the combustion chamber of scramjets, fuel jets interact with supersonic airflow in the form of a liquid jet in crossflow (LJIC). It is difficult to achieve adequate jet?crossflow mixing and the efficient combustion of fuel in an instant. Large eddy si... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Xuan Jin, Yang Yang, Xiaomei Cao and Jinshui Wu    
The variable-area pintle injector has unique geometry and spray characteristics compared to traditional coaxial injectors, and is advantageous for weight lightening and deep throttling of liquid rocket engines. To obtain an accurate prediction of the spr... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Xunmin Ou, Xiaoyu Yan, Xu Zhang and Xiliang Zhang    
A life-cycle analysis (LCA) of greenhouse gas (GHG) emissions and energy use was performed to study bio-jet fuel (BJF) production from micro-algae grown in open ponds under Chinese conditions using the Tsinghua University LCA Model (TLCAM). Attention was... ver más
Revista: Energies    Formato: Electrónico

 
en línea
Anu Mohandas, Hongrong Luo and Seeram Ramakrishna    
Atomization is an intricate operation involving unstable and complex networks with rupture and fusion of liquid molecules. There are diverse details that typify the spray formation, which are the technique and configuration of the atomization process, di... ver más
Revista: Applied Sciences    Formato: Electrónico

 
en línea
Irina Nizovtseva, Vladimir Palmin, Ivan Simkin, Ilya Starodumov, Pavel Mikushin, Alexander Nozik, Timur Hamitov, Sergey Ivanov, Sergey Vikharev, Alexei Zinovev, Vladislav Svitich, Matvey Mogilev, Margarita Nikishina, Simon Kraev, Stanislav Yurchenko, Timofey Mityashin, Dmitrii Chernushkin, Anna Kalyuzhnaya and Felix Blyakhman    
Development of energy-efficient and high-performance bioreactors requires progress in methods for assessing the key parameters of the biosynthesis process. With a wide variety of approaches and methods for determining the phase contact area in gas?liquid... ver más
Revista: Algorithms    Formato: Electrónico

 
en línea
Hongbing Xiong and Weiqi Sun    
Solution precursor plasma spray (SPPS) is a novel and promising technique in producing nanostructured coatings. This technique involves complex heat, mass and momentum transfer among the liquid feedstock, droplets, plasma jet and the coating material. Ne... ver más
Revista: Coatings    Formato: Electrónico

 
en línea
Younseok Choi and Jinkwang Lee    
As the demand for alternative fuels to solve environmental problems increases worldwide due to the greenhouse gas problem, this study predicted the demand for liquid hydrogen fuel in aviation to achieve ?zero-emission flight?. The liquid hydrogen fuel mo... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Sergei Strijhak, Daniil Ryazanov, Konstantin Koshelev and Aleksandr Ivanov    
In this article the procedure and method for the ice accretion prediction for different airfoils using artificial neural networks (ANNs) are discussed. A dataset for the neural network is based on the numerical experiment results?obtained through iceFoam... ver más
Revista: Aerospace    Formato: Electrónico

 
en línea
Yexiang Xiao, Zhonghua Gui, Xuesong Li, Zekui Shu, Guangtai Shi and Chunwei Gu    
In this paper, the gas-liquid flow is comprehensively analyzed under different inlet gas void fractions, and the effect of tip leakage vortex (TLV) on the gas flow pattern in multiphase pumps is revealed. The results show that the gas flow pattern in an ... ver más
Revista: Journal of Marine Science and Engineering    Formato: Electrónico

« Anterior     Página: 1 de 2     Siguiente »