|
|
|
|
|
Radoslav Tomovic
This paper presents a new model for calculation of load for the most loaded rolling element in a rolling bearing with internal radial clearance. The calculation is based on a so-called load factor. By multiplying this factor by the value of the external ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yiyao Jiang, Guang Feng, Panglun Liu, Li Yuan, Jianbin Ding and Bingyan Jiang
Through the establishment of a three-dimensional joint clearance model, the effects of joint clearances at different positions on shimmy stability are evaluated. In this paper, considering the radial, axial and coupling characteristics of joint clearance...
ver más
|
|
|
|
|
|
|
|
|
|
|
Radoslav Tomovic
In this paper, a simplified approach in the analysis of the varying compliance vibrations of a rolling bearing is presented. This approach analyses the generation of vibrations in relation to two boundary positions of the inner ring support on an even an...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yiming Wang, Yun Chen, Gang Xue, Tianxu Zhang and Yanjun Liu
Combining one-dimensional parameter optimization and three-dimensional modeling optimization, a 30 kW radial inflow turbine for ocean thermal energy conversion was designed. In this paper, the effects of blade tip clearance, blade number, twist angle, an...
ver más
|
|
|
|
|
|
|
|
|
|
|
Guang Feng, Bingyan Jiang and Yiyao Jiang
The existence of joint clearances in the nose landing gear (NLG) is inevitable and significantly affects shimmy. It was found that the interaction of each joint clearance is closely related to the analysis of shimmy stability. In this study, the shimmy m...
ver más
|
|
|
|
|
|
|
|
|
|
|
Giulio Cantini, Simone Salvadori, Massimiliano Insinna, Giorgio Peroni, Gilles Simon, Duccio Griffini and Raffaele Squarcini
Regenerative pumps are characterized by a low specific speed that place them between rotary positive displacement pumps and purely radial centrifugal pumps. They are interesting for many industrial applications since, for a given flow rate and a specifie...
ver más
|
|
|
|
|
|
|
|
|
|
|
Marios Patinios, James A. Scobie, Carl M. Sangan and Gary D. Lock
This paper presents measurements of CO2 concentration and pressure in a new, highly instrumented and versatile, 1.5-stage gas turbine facility. The rig, which has been specifically designed for investigations related to hot gas ingestion, features interc...
ver más
|
|
|
|
|
|
|
|
|
|
|
Huifang Sun, Yue Lv, Jinbing Ni, Xianyu Jiang and Zhengwei Wang
Axial hydraulic thrust is an important factor that affects safety and stability of pump turbine operation. Research and analysis of axial hydraulic thrust is of a great significance for guiding the safe and stable operation of a pumped storage power stat...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yifan Wang, Kun Jin, Xingxing Huang, Peng Lin, Zhengwei Wang, Wenliang Wang and Lingjiu Zhou
In this paper, a 1000 MW Francis turbine was used to study the influences of uneven clearance distribution caused by various radial installation deviations on the hydraulic thrust of a runner under the rated operating condition with steady-state CFD anal...
ver más
|
|
|
|
|
|
|
|
|
|
|
José Ramón Serrano, Andrés Omar Tiseira, Juan Antonio López-Carrillo and Natalia Hervás-Gómez
The widespread trend of pursuing higher efficiencies in radial turbochargers led to the prompting of this work. A 3D-printed model of the static parts of a radial variable geometry turbine, the vaned nozzle, and the volute, was developed. This model was ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Xavier Flete, Nicolas Binder, Yannick Bousquet and Sandrine Cros
In the current study, full-stage unsteady simulations were performed to investigate rotating instability inception mechanisms in a particularly large tip clearance centrifugal compressor with a vaneless diffuser and a volute. Four operating points along ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Michael Mansour and Dominique Thévenin
This paper aims to summarize the results of several experimental investigations regarding two-phase liquid?gas flows in radial centrifugal pumps. The main objective is to combine the corresponding experimental results and collect the obtained knowledge t...
ver más
|
|
|
|
|
|
|
|
|
|
|
Yanzhao Wu, Xiaohang Wang, Xiaolong Yang, Junfeng Ding, Di Zhu, Ran Tao, Huanmao Wang and Ruofu Xiao
Tubular turbine is a type of turbine with low-head. Due to the fact that the runner of a tubular turbine is of axial-flow type, there will be a certain width of blade tip between the blade and the chamber. In order to explore the influence of tip clearan...
ver más
|
|
|
|
|
|
|
|
|
|
|
Haifeng Jiao, Jilian Shan, Guorui Yang, Mengcheng Wang and Songshan Chen
In this study, a comparative analysis of the shutdown transitions of a full-flow pump and an axial-flow pump was carried out through numerical simulation and model tests. The UDF method was used to achieve control of the impeller rotational speed during ...
ver más
|
|
|
|
|
|
|
|
|
|
|
Ning Zhang, Jun Fu, Ruixue Wang, Zhi Chen, Qiankun Fu and Xuegeng Chen
The distribution of the threshed mixture is the link between the threshing and cleaning process during corn harvesting. Uneven distribution leads to a local accumulation of the mixture in the cleaning, resulting in high impurity and loss rate. Existing s...
ver más
|
|
|
|
|
|
|
|
|
|
|
Pierre Duquesne, Joffrey Chanéac, Gabriel Mondin and Jérôme Dombard
Boundary-layer flow separation is a common flow feature in many engineering applications. The consequences of flow separation in turbomachinery can be disastrous in terms of performance, stability and noise. In this context, flow separation is particular...
ver más
|
|
|
|
|
|
|
|
|
|
|
J. Michael Owen, Hui Tang and Gary D. Lock
Increasing pressures in gas-turbine compressors, particularly in aeroengines where the pressure ratios can be above 50:1, require smaller compressor blades and an increasing focus on blade-clearance control. The blade clearance depends on the radial grow...
ver más
|
|
|
|
|
|
|
|
|
|
|
J. Michael Owen, Hui Tang and Gary D. Lock
Increasing pressures in gas-turbine compressors, particularly in aeroengines where the pressure ratios can be above 50:1, require smaller compressor blades and an increasing focus on blade-clearance control. The blade clearance depends on the radial grow...
ver más
|
|
|
|
|
|