Resumen
Not all sunlight irradiated on the surface of a photovoltaic (PV) module can reach the cells in the PV module. This loss reduces the conversion efficiency of the PV module. The main factors of this loss are the reflection and soiling on the surface of the PV module. With this, it is effective to have both antireflection and antisoiling effects on the surface of PV modules. In this study, the antireflection and antisoiling effects along with the long-term reliability of the silica-based layer easily coated on PV modules were assessed. A silica-based layer with a controlled thickness and refractive index was coated on the surface of a Cu(In,Ga)Se2 PV array. The array was exposed outdoors to assess its effects and reliability. As a result of the coating, the output of the PV array increased by 3.9%. The environment of the test site was relatively clean and the increase was considered to be a result of the antireflection effect. Moreover, it was observed that the effect of the coating was maintained without deterioration after 3.5 years. The coating was also applied to a silicon PV module and an effect similar to that of the CIGS PV module was observed in the silicon PV module.