Acceso al sitio web del Consejo de Políticas de Infraestructura

   
Redirigiendo al acceso original de articulo en 15 segundos...
ARTÍCULO
TITULO

High Loaded Synthetic Hazardous Wastewater Treatment Using Lab-Scale Submerged Ceramic Membrane Bioreactor

Mashallah Rezakazemi    
Mohsen Maghami    
Toraj Mohammadi    

Resumen

Submerged ceramic membrane bioreactors (SCMBRs) are more efficient combinations of traditional activated hazardous sludge and new membrane separation processes in wastewater treatment. Suspended solids are separated from hazardous effluent using microfilter ceramic membranes in SCMBRs. A high loaded wastewater was treated using an SCMBR employing a homemade tubular ceramic membrane in laboratory scale. Hydraulic Retention Time (HRT) was 32 h and COD range was varied from 2000 to 5000 mg/l. COD removal was evaluated to be more than 90% after a week and the lab scale SCMBR showed desired performance for the wastewater treatment. Mixed Liquor Suspended Solid (MLSS) was increased from 2000 to 4000 mg/L during the SCMBR operation time.

Palabras claves

PÁGINAS
pp. 299 - 304

 Artículos similares

       
 
Sasikumar P, Manju R     Pág. 293 - 305

 
Jian Liu, Mengyao Xu, Pengchao Liu and Wenxiong Xi    
At an extremely high Mach number, the regenerative cooling of traditional kerosene cannot meet the requirement of the heat sink caused by aerodynamic heating and internal combustion in a scramjet propulsion system. As a supplement of traditional regenera... ver más
Revista: Aerospace

 
Oleg M. Alifanov, Margarita O. Salosina, Sergey A. Budnik and Aleksey V. Nenarokomov    
Highly porous open-cell carbon materials have great potential for use as high-temperature thermal insulation for space vehicles due to a unique combination of properties: low density, high rigidity, sufficient compressive strength, and low thermal conduc... ver más
Revista: Aerospace

 
Yingjie Chen, Le Cai, Dengyu Jiang, Yiyi Li and Songtao Wang    
Experimental and numerical studies of a linear high-loaded turbine cascade with a dual-cavity tip structure are presented in this paper. The experimental conditions contained an increase in the outlet Mach number from 0.42 to 0.92, a change in the incide... ver más
Revista: Aerospace

 
Stefano Gaggero and Marco Ferrando    
Tip loading is a common strategy to increase the propulsive efficiency of propellers. Solutions such as contracted and tip-loaded (CLT) and ?New generation? CLT propellers exploit the presence of an endplate (?true? or as the result of a dedicated modifi... ver más