Resumen
The efficient mineralization of high-concentration aqueous aniline (HCAA) is an issue needing to be resolved. In this study, a hybrid process of ozonation and electrochemical oxidation (ECO) was proposed for improving the mineralization of HCAA (1000 mg·L-1). The results indicated that chemical oxygen demand (COD) removal by the hybrid process was far greater than that of a single ozonation or ECO process, revealing that the hybrid process might avoid low efficiency in late ozonation and initial ECO. Thus, a subsequent combination effect clearly existed. In this hybrid process, ozonation stage time was selected as 60 min for optimal COD removal. The main products of the ozonation stage were maleic and succinic acids, with declining pH which was beneficial to the following ECO stage. Nitrite and nitrate formed during ozonation, which acted as electrolytes for the ECO stage, in which maleic and succinic acids were fully degraded and pH thus increased. Moreover, the aniline degradation mechanism of the hybrid process was deduced, demonstrating the superiority of this hybrid process. Finally, more than 95% COD removal was achieved, which met the COD limit requirement and achieved pH control simultaneously, according to the discharge standards of water pollutants for dyeing and finishing of the textile industry in China (GB 4287?2012).