Resumen
This study reports the recovery of Pd(II) from acid solution by a polyethylenimine (PEI)-crosslinked chitin (PEI-chitin) biosorbent. FE-SEM analysis demonstrated that there are many slot-like pores on PEI-chitin. The N2 adsorption?desorption experiment revealed that the average pore size was 47.12 nm. Elemental analysis verified the successful crosslinking of PEI with raw chitin. The Langmuir model better explained the isotherm experimental data and the theoretical maximum Pd(II) uptake was 57.1 mg/g. The adsorption kinetic data were better described by the pseudo-second-order model and the adsorption equilibrium was achieved within 30 min for all initial Pd(II) concentrations of 50?200 mg/L. In the fixed-bed column, the adsorption of Pd(II) on PEI-chitin showed a slow breakthrough and a fast saturation performance. The desorption experiments achieved a concentration factor of 8.4 ± 0.4; in addition, the adsorption?desorption cycles in the fixed-bed column were performed up to three times, consequently confirming the good reusability of PEI-chitin for Pd(II) recovery. Therefore, the PEI-chitin can be used as a promising biosorbent for the recovery of Pd(II) in practical applications.