Resumen
Current surveying techniques are typically applied to survey the as-is condition of buildings, brownfield sites and infrastructure prior to design. However, within the past decade, these techniques evolved significantly, and their applications can be enhanced by adopting unmanned aerial vehicles (UAVs) for data acquisition, up-to-date software for creating 3D reality mesh, which in turn opens new possibilities for much more efficient construction site surveying and constant updating and process management. In this study the workflows of three UAV-based photogrammetry techniques: Real Time Kinematic (RTK), Post-Processing Kinematic (PPK) and Global Positioning System (GPS) based on control points were analyzed, described, and compared to conventional surveying method with Global Navigation Satellite System (GNSS) receiver. Tests were performed under realistic conditions in 36 ha quarry in Lithuania. The results of the relationship between ground sample distance (GSD) and the comparison of volume measurements under each technique, including conventional method were analyzed. The deviation of data collected on field vs. generated in reality mesh, including ground control points (GCPs) and check points (CHPs) with different configurations, was investigated. The research provides observations on each workflow in the terms of efficiency and reliability for earthwork quantity estimations and explains processing schemes with advanced commercial software tools.